Learning Resources & Storefront
Use the learning guides, road-reference tools and recommended practice equipment collected for LearnerMiles students and coaches.
Time: [Date]
Span: [Total Minutes]
Light: [Daylight/Darkness]
Climate: [Current Weather Condition]
Street: [Road Type]
Method: [Skills Practiced]
Trust: [1–5]
Thoughts: [Student Reflection]
Mentoring: [Level: Full/Freq/Few/Ind]
Monitor: [Coach Name]
Advice: [Trainer Observations]
Learn the skill, practice it calmly, then record what happened honestly.
These illustrations present global traffic concepts rather than specific regional codes. Symbols and legalities differ by territory. Always prioritize your local statutes.
Stop — Defined: cease all motion. Proper conduct: halt at the line and wait until clear air and local law permit movement.
Yield — Defined: concede passage as required. Proper conduct: decelerate, scan, and halt if necessary prior to entry.
Forbidden Entry — Defined: access is prohibited here. Proper conduct: navigate via a different legal path.
Speed Regulation — Defined: the posted metric is the legal maximum. Proper conduct: stay under the limit and adjust for hazards.
Signal Control — Defined: colored lamps manage traffic flow. Proper conduct: follow the specific light and local turn rules while maintaining high situational awareness.
Walkway Zone — Defined: pedestrians have access. Proper conduct: check both directions and yield as dictated by the specific local traffic code.
Solo Direction — Defined: cars move only one way. Proper conduct: enter and stay pointed in the mandated direction.
Traffic Circle — Defined: a rotating junction is present. Proper conduct: slow down and grant right of way per local norms; yielding direction depends on the side driven.
Maintenance — Defined: crew or site changes ahead. Proper conduct: reduce velocity, leave extra room, and follow signs.
Rail Intersection — Defined: train lines cross the path. Proper conduct: verify tracks are clear, obey all alarms, and never stall on the crossing.
No Turning — Defined: the specific turn shown is banned. Proper conduct: travel straight or turn where legal.
Caution Alert — Defined: a specific danger or change exists. Proper conduct: ease off the gas, identify the issue, and prepare to take evasive action.
Dashed Divider — Defined: separates traffic; passing might be okay. Proper conduct: move across only if safe and legal.
Unbroken Divider — Defined: movement is restricted/illegal. Proper conduct: remain centered in your current lane.
Twin Solid Line — Defined: separates flows; crossing is barred. Proper conduct: stay on your side unless an emergency occurs.
Outer Border — Defined: marks the drivable surface. Proper conduct: stay within the lines unless pulling over.
Halt Marker — Defined: indicates where to stop. Proper conduct: stay behind this line to keep junctions open.
Priority Marker — Defined: shows the yield point. Proper conduct: approach with care and stop if path is blocked.
Zebra Path — Defined: marked walker zone. Proper conduct: keep the area open and yield per law.
Lane Guidance — Defined: shows required path. Proper conduct: get in the lane early and follow the arrow's law.
Student Driver Record
Make sure you meet every specific legal obligation for your city before you start your sessions.
Check you meet the required minimum driver age
Pass the required written or online permit test
Pick a mentor who meets local legal standards
Verify any restrictions on nocturnal roads
Confirm coverage for a student on the policy
Sort all physical license paperwork
Know the rules for guests and cell phones
Keep a car ready that passes the safety test
Confirm how the final hour log is turned in
State statutes take priority